Whirlpool Bath Cleaning Process

1. Place the chair in the tub, release the carrier from the tub, and close the door.
2. Close the Tub Drain. Turn the Selector Knob to "TUB CLEANER" and the Control Knob to "On.”
3. Turn the whirlpool on. After the Turbo Clean™ mixture has come out of the jets for about 30 seconds or when there is about 2 inches of cleaning solution in the foot well; turn the Selector Knob to "Rinse."
4. Lift seat bottom off chair, (pull up from back of seat). Use the cleaning solution to scrub the tub, chair and underneath seat bottom. When clear water comes out of all the jets, turn the whirlpool off.
5. Turn the Control Knob to "Off" and open the Tub Drain.
6. Use the shower wand to rinse the tub and chair.

Whirlpool Bath Disinfecting Process

1. Place the chair in the tub, release the carrier from the tub, and close the door.
2. Close the Tub Drain. Turn the Selector Knob to "DISINFECTANT" and the Control Knob to "On.”
3. Turn the whirlpool on. When there is about 2 inches of disinfectant in the foot well, turn the whirlpool off. Turn the Control Knob to "Off."
4. Lift seat bottom off chair, (pull up from back of seat). Use the disinfecting solution to scrub the tub, chair and underneath seat bottom. Leave wet for 10 minutes. Open the Tub Drain.
5. After 10 minutes, turn the Selector Knob to "Rinse" and the Control Knob to "On.”  Turn the whirlpool on.
6. When clear water comes out of all the jets, turn the whirlpool off. Turn the Control Knob to "Off."
7. Use the shower wand to rinse the tub and chair.

Air Spa Bath Cleaning Process

1. Place the chair in the tub, release the carrier from the tub, and close the door.
2. Close the Tub Drain. Turn the Blower on.
3. Turn the Selector Knob to "TUB CLEANER" and the Control Knob to "On." After the Turbo Clean™ mixture has come out of the outlets for about 30 seconds or when there is about 2 inches of cleaning solution in the foot well; turn the Selector Knob to "Rinse."
4. Lift seat bottom off chair, (pull up from back of seat). Use the cleaning solution to scrub the tub, chair and underneath seat bottom. When clear water comes out of all outlets, turn the Control Knob to "Off."  Open the Tub Drain.
5. Leave the Blower on for 60 seconds to force the remaining clear water out of the air lines. Turn the Blower off. Use the shower wand to rinse the tub and chair.

Air Spa Bath Disinfecting Process

1. Place the chair in the tub, release the carrier from the tub, and close the door.
2. Close the Tub Drain. Turn the Blower on.
3. Turn the Selector Knob to "DISINFECTANT" and the Control Knob to "On.” When there is about 2 inches of disinfectant in the foot well, turn the Control Knob "Off."
4. Turn the Blower off. Lift seat bottom off chair, (pull up from back of seat). Use the disinfecting solution to scrub the tub, chair and underneath seat bottom. Leave wet for 10 minutes. Open the Tub Drain.
5. After 10 minutes, turn the Blower on. Turn the Selector Knob to "Rinse" and the Control Knob to "On." When clear water comes out of all outlets, turn the Control Knob to "Off."
6. Leave the Blower on for 60 seconds to force the remaining clear water out of the air lines. Turn the Blower off. Use the shower wand to rinse the tub and chair.