Category: FAQ

In long-term care and senior living, few moments carry as much risk and emotional weight as helping someone into a tub.

Leaders are balancing three pressures at once:

• Reducing staff injuries and OSHA reportables

• Protecting residents from falls and traumatic transfer events

• Staying in compliance with state regulations and internal safe-handling policies

For years, the default answer to those pressures has been the mechanical lift: a sling or Hoyer-style device that does the heavy lifting. Those lifts absolutely have an important place in modern care. They’re essential for many high-acuity residents and, when used correctly, they can significantly lower caregiver strain and injury.

But in the bathing room, a different option exists: an integrated, seated transfer that replaces a lift as part of our purpose-designed bathing system like the Apollo Advantage™.

This isn’t about replacing every lift in your building. It’s about asking a simple question for bathing:

If the chair itself can safely transfer, position, and support the resident before, during and after the bath, do we still need a separate mechanical lift for this task?

For a growing number of communities, the answer is no—and that’s where the no-lift transfer chair replaces a bathing lift to reshape safety, experience, and cost.

Lifts Are Not the Enemy — Misuse and Misfit Are

Before going further, let’s be clear: Apollo is not “anti-lift.”

• Many residents rely on mechanical lifts for safe transfers.
• Some state regulations and community policies require lifts in specific care settings or for certain acuity levels.
• Some bathing rooms are already configured around ceiling or floor lifts and need that compatibility.

We respect those guidelines and operate within them. In fact, our ReGen™ model is compatible with most standard mechanical lifts, so teams can meet regulatory expectations and still offer a safer, more comfortable bathing option.

The problem isn’t the lifts themselves. It’s what happens when:

• A separate lift and a standard tub create awkward angles, narrow clearances, and risky maneuvering in a wet room.
• Staff are rushed, undertrained, or physically strained and “shortcut” correct lift use.
• The equipment is present on paper, but sits idle or dusty in the hallway because it’s too complicated, time-consuming, or intimidating to use.

In those situations, the risk shifts back onto staff backs, resident confidence, and your liability exposure.

An integrated, level-glide transfer seat for the Advantage tub isn’t a repudiation of current safe-handling equipment. It’s a way to design the lift out of the workflow so the bathing system can be used consistently and correctly—especially during transfers, one of the most complex and emotionally sensitive care tasks teams manage.

What an Integrated Transfer Seat Does Differently Than Lifts

Advantage-style tubs integrate the lifting and positioning mechanism directly into the system. Instead of a separate sling or floor lift, the resident is supported by a removable, lock-in chair with a transfer mechanism that is purpose-built for bathing.

That design difference matters in several ways.

1. Fewer Transfer Steps, Fewer Failure Points

A traditional “tub + separate lift” setup often looks like:

1. Position the lift in a tight room
2. Attach and adjust sling
3. Raise resident, swing over wet surfaces
4. Lower into a standard tub that wasn’t truly designed for that entry angle

At every step, there’s potential for:

• Sling slippage or improper fitting
• Awkward twisting for staff
• Swinging over hard, wet surfaces
• Resident anxiety or behavioral escalation

Research on safe resident handling consistently shows that more manual steps and repositionings increase the chance of injury for staff and residents alike.

With an integrated seat, the path is more controlled and predictable:

• The seating surface, support points, and transfer arc were engineered together.
• Staff learn one consistent process rather than improvising around a generic tub.
• The system is anchored and stable—residents can move from bedside to bath just once.

You’re not eliminating safety equipment; you’re embedding it.

2. A Bathing Room That Works With You, Not Against You

In many buildings, the bathing room simply wasn’t designed for a rolling lift, plus staff plus a large tub. Even when the space meets the code on paper, the lived experience can feel cramped, chaotic, and stressful.

A built-in chair simplifies the footprint:

• No need to maneuver a floor lift in a tight space.
• No extra device standing in the corner, waiting to be disinfected and repositioned.
• Clear, repeatable pathways for staff to work in safe body positions.

That matters for surveyors and risk teams, too. When the room visually communicates order and purpose—rather than equipment clutter—it’s easier to document and defend your safe-handling protocols.

3. Staff Confidence and Consistency

Every DON and administrator knows: if staff don’t feel confident with equipment, they’ll improvise.

An integrated bathing system supports:

• Shorter training curves – One tool, one process. New staff can shadow, repeat, and practice on a single, standardized setup.
• Better adherence to protocol – The “right way” to bathe with the Advantage is literally built into the seat’s mechanics.
• Less moral stress – A secure, predictable transfer lowers anxiety for staff who genuinely want to keep residents safe but feel stretched thin.

Studies on safe handling show that organizational culture and equipment usability are just as important as equipment availability in preventing injuries.

An integrated transfer system supports both: it signals that leadership has invested in a system that makes doing the right thing the easy thing.

Respecting Regulations: Where Lifts Still Belong

In some care settings, regulators or internal policies explicitly require mechanical lifts for certain residents or specific tasks. For example, some states have tightened rules about when residents in assisted living can be transferred using floor lifts, with the intent of aligning mobility needs to the right level of care.

Apollo’s position is straightforward:

• Where mechanical lifts are required, they should be used.
• Where they’re clinically appropriate, we support them.
• Where the tub itself can safely provide the lift function, communities should have that option.

That’s why the product line is structured the way it is:

• Advantage™ – A fully integrated transfer system. The elimination of the need for a traditional lift is built into the bathing solution itself, so for many residents, the lift is a huge part of the fear.
• ReGen™ – Designed to be lift-compatible. Where regulations or policies require a mechanical lift, the ReGen tub can still be part of a safe, compliant bathing plan.

Rather than positioning tubs “against” lifts, we design for “and”:

• Advantage for communities that want to replace the lift for a simplified bathing room experience.
• ReGen for communities that must integrate with mechanical lifts but still want a better bathing experience.

Beyond Compliance: Experience, Dignity, and Time

Safety and compliance often drive decision-making, but they’re not the only outcomes at stake.

Resident Experience and Dignity

Mechanical lifts can feel intimidating: metal frames, slings, multiple belts and clips. For some residents, that can trigger fear, agitation, or a sense of being “hoisted” rather than cared for.

With an integrated bathing system with seated transfer:

• The environment looks more like a specialized spa than a warehouse of equipment.
• The seating and transfer process can feel more like being helped into a supportive chair.
• The focus stays on warmth, privacy, and the sensory comfort of the bath itself.

Bathing is one of the few remaining rituals residents associate with feeling clean, human, and at ease. The more we can reduce the visual and psychological “noise” around that experience, the better.

Staff Time and Workflow

A separate mechanical lift means:

• Locating it
• Checking charge or readiness
• Rolling and positioning it
• Cleaning and returning it

Repeated across multiple baths per day, those minutes add up. In a staffing environment where every minute counts, simplifying the process can have real operational value.

With a built-in lift replacement in the form of Apollo’s mobile transfer seat:

• The tub is always in the room, ready to use.
• The chair can go wherever the resident is. 
• The transfer process is integrated into the same routine staff already follow.
• The risk of “we skipped the lift because we were rushed” is reduced—not by another policy, but by design.

Cost: Looking Beyond the Purchase Order

On paper, a standalone tub plus a mechanical lift can appear cheaper than a specialized Advantage-style system.

But that snapshot misses the full picture:

• Equipment redundancy – When the tub has a built-in transfer process, there’s no need to purchase a separate lift just for bathing in that room.
• Maintenance and replacement – Fewer mechanical devices means fewer batteries, casters, slings, and service calls to manage.
• Injury and lost time – Back injuries and transfer-related incidents are among the costliest workers’ comp claims in long-term care. Safe handling programs and lift-assisted transfers can reduce those injuries by 40–60% in some settings.

When you look at five- to seven-year ownership, the integrated approach often compares very favorably—especially when you add the downstream value of smoother workflows and stronger staff retention.

Where ReGen Fits: When You Need Both Tub and Lift

There will always be communities and care levels where a mechanical lift remains non-negotiable.

That’s exactly where the ReGen™ model earns its place:

• The tub geometry and clearances are designed to work with common floor and ceiling lifts.
• You get the infection-control and comfort benefits of a modern bathing system while staying aligned with your safe-handling policy.
• Staff aren’t forced to choose between “the good tub” and “the compliant setup”—they can have both.

In many organizations, the optimal mix looks like:

• Advantage on units where staff can rely on the level glide seat as the primary transfer method.
• ReGen in higher-mobility resident populations or more tightly regulated settings where mechanical lifts will always be part of the plan.

That portfolio approach lets you standardize on Apollo while tailoring the actual equipment to the realities of each building and care level.

Lift Replacement & Experience Enhancement: One Strategic Choice

The no-lift transfer chair isn’t just a product feature. It’s a strategic response to the realities your teams face:

• More complex resident acuity
• Thinner staffing and rising wage pressure
• Tightened regulations and survey scrutiny
• Heightened expectations around safety and dignity

Through eliminating the lift by design of the bathing system, you:

• Reduce steps and failure points in a high-risk task
• Make the safe way the easy way for staff
• Respect regulations while still room-planning for real-world use
• Free your mechanical lifts for the tasks that truly require them
• Give residents a calmer, more dignified experience

Apollo will never argue that lifts don’t belong in senior care. They do. We simply believe that in the bathing room, there’s a strong case for letting the tub itself do the lifting—safely, consistently, and with the kind of experience your residents and staff remember for the right reasons.

Curious whether a no-lift, seated transfer Advantage model or a lift-compatible ReGen is the better fit for your next project?

Our team can walk your DON, therapy lead, and maintenance director through real-world layout examples, staffing scenarios, and cost comparisons so you can select the right configuration for each bathing room.

HUBSPOT LINK

Because when the tub, the lift, and the workflow are designed together, everyone’s job gets easier—and everyone’s risk goes down.

TUB COMPARISON TOOL LINK