Feels like home. Built for community care.
The ReGen™ gives ambulatory residents a spa-grade bath they can enter on their own — low threshold, wide door, heated seat and back. And it is built to institutional duty standards, because bathing every resident in a community is a different job than bathing one person at home. Not sure it fits your residents? See how side-entry and end-entry tubs compare.
Typically $10.5–14.4K configured · exact price at quote
Financing available — a better bathing room doesn’t have to wait for next year’s budget. Explore options →
A note for homeowners: Apollo builds bathing systems for senior care facilities. We do not sell or install residential walk-in tubs. If you are researching a tub for your own home, we are not the right fit — and we would rather tell you now than waste your afternoon. If you run a community, keep reading.
Two decisions get you to the right system.
Not eighteen models. Not a spec-sheet safari. Your residents answer the first question, your preferences answer the second — and our team pressure-tests both against your room.
Open the Full Selection Guide- 1Who are your residents? Ambulatory residents who can step over a low threshold — the ReGen is built for them. Residents who need assisted, seated transfers belong on the Advantage™.
- 2Whirlpool or AirSpa? Whirlpool brings 14 hydro-massage jets and supports optional Remedy® UV. AirSpa brings AIR X™ air jets with no water recirculation — simpler cleaning between baths. Both are the right answer for the right community.
Built Around the Resident Who Walks In
Walk in. Bathe with dignity.
Low-threshold entry and a 38.9-inch outswing door that clears most toilet sets. Residents who dread being lifted never face a lift — they step in, sit down, and the bath belongs to them again. Staff assist when needed instead of managing every transfer.
Warm from first minute to last.
Heated seat and back surfaces welcome the resident before the water rises, and the optional in-line heater holds temperature through a full 20-minute bath. Residents finish the bath they started — nobody rushes out of cooling water.
Built for the duty cycle.
Premium gel-coated fiberglass, quick drain, easy-access maintenance panels, leveling legs and lift compatibility. A residential tub bathes one household. The ReGen bathes a community — every day, for years, with a 10-year shell warranty behind it.
A spa for your residents. A protocol for your staff.
The ReGen supports an integrated cleaning delivery system and runs the same two-step clean-and-disinfect protocol Apollo teaches on every system it builds. And loyalty pays: regular use of Apollo Bath liquids (about a case a month) extends supporting-equipment coverage — motors, fixtures, controls, faucets — from 5 years to 10.
Shop Apollo SolutionsThe Two-Step Protocol Pair
Options & Specifications
Standard Features
- Low step threshold for easy access
- Premium gel-coated fiberglass finish
- Wide 38.9 in outswing door
- Quick drain feature
- Easy-access maintenance panels
- Leveling legs and lift compatibility
- Thermostatic mixing valve for bathing safety
- 10-year shell warranty on every model
Optional Add-Ons
- Remedy® UV — purifies water during the bath for a cleaner bathing environment
- Heated seat and back surfaces
- In-line water heater — holds temperature through a 20-minute bath
- Integrated disinfectant / cleaning delivery system
Technical Specifications
Standard bathtub footprint at 59.6 in L x 30.1 in W x 40.5 in H
14 hydro-massage jets (Whirlpool configuration)
Wide door design swings over most toilet sets
Thermostatic mixing valve sets max/min temperatures for bathing safety
Easy-access maintenance panels
Installation Specifications
Dimensions: 59.6 in (151.4 cm) L x 30.1 in (76.5 cm) W x 40.5 in (102.9 cm) H
Shipping Weight: 400 lb (272 kg)
Faucets: (2) 0.75 in NPT wall-mounted faucets
Water Supply: Minimum 30 PSI (2.1 bar) hot and cold
Waste: 1.5 in PVC schedule 40 pipes; OD 1.9 in
Electrical (without in-line heater): 1 dedicated 115 VAC 15A GFCI circuit breaker
Electrical (with in-line heater): 2 dedicated 115 VAC 15A GFCI circuit breakers
Tub Fill: ASSE 1070 / 1016 certified thermostatic mixing valve
Tub Entry: 38.9 in outswing door
Shower: Handheld with 84 in (213.4 cm) ASME A112.18.1 hose
Gasket: D-shaped, ASTM D2000, EPDM extrusion
Whirlpool & AIR X™ Details
Whirlpool Pump Motor: 1.5HP, 110–120 VAC, 60 Hz, 13A, 125 GPM max flow rate
Whirlpool Jets: 14 hydro-massage jets
AIR X™ System: High-volume air dynamics with an 80% air / 20% water mix — the soft feel of air and water with kinetic power, enhanced by three jet fan types and optional trim accessories
In-Line Water Heater: Maintains water temperature up to 105ºF
Surface Heaters: Seat and back surface heaters with safety timer and thermostat to prevent scalding
Listed, and audited every quarter
The ReGen™ carries an IAPMO R&T Certificate of Listing. An independent certification body tested it, certified it to published plumbing standards, and audits our factory quarterly to confirm the units we ship still meet them.
- Certified to ASME A112.19.15-2012 (R2017) and ASME A112.19.7-2020 / CSA B45.10-2020
- Code compliance Uniform Swimming Pool, Spa and Hot Tub Code (USPC®) and National Plumbing Code of Canada
- IAPMO R&T file SP-17702 — verify at pld.iapmo.org
- Ongoing surveillance Quarterly factory audits and quality-system review
Specifying this system? The full listing and specification documents are in our resource library.
Lift-Friendly Design, Walk-In Dignity
Everything Your Team Needs to Evaluate, Install, and Operate
Ready to talk specifics?
Tell us about your residents and your room. We’ll tell you exactly what fits — and what it costs.